Creating feldspathic porcelain veneers  is a master craft method that few dentist/technician teams use. This method employs a laborious hand stacking technique. The ceramist applies small amounts of different porcelains mixing into a single monolithic layer.

These porcelains vary in levels of opacity, brightness, and color, and are artfully laid down as the tooth form is built up. Feldspathic porcelain veneers require less drilling on the teeth because it matches better.
This type of veneer is desired due to unmatched blending capabilities as well as aesthetics.

Feldspathic porcelain is considered one of the most appealing cosmetic solutions. This veneering fabrication style may be recommended for patients when:

• The drilled tooth still has most of its enamel
• The patient does not grind their teeth
• When shade matching is difficult
• With extremely demanding patients

It depends on your dentist and how much tooth is left when the drilling stops. They are very strong when your dentist is conservative with the drill and leaves the majority of enamel in place. Feldspathic porcelain bonds extremely well to enamel. The tooth is actually strengthened by the presence of the new veneer.
The feldspathic restoration is considered monolithic with one type of porcelain. It does not have a strong coping substructure to support it. The tensile strength of 85 MPa is low on its own and needs to be treated like fine china until bonded onto the tooth. This type of restoration gains its strength from the bond to enamel. If supported and bonded to enamel, it is incredibly strong.

Most dentists drill too much tooth structure away for this type of veneer. Often less than 50% of the remaining exposed clinical crown has enamel to bond to. If this is the case, then the feldspathic porcelain restoration will be one of the weakest options. It would be contraindicated for patients who are tough on their natural teeth. Understandably, the choice of restorative material is often made intra-operatively. When more than 50% of the enamel has been removed during the drilling process, a crown might be a better option. Crowns don’t require as much enamel for bonding.

Flash! Whitening is ideal for patients whose time is limited, or who have an important event coming up for which they want to look their best.
Flash! Consistently delivers fantastic results, which is why is one of the most popular in-practice whitening procedures on the market and has been for many years.

• Instant results – we can whiten your teeth up to 5 shades lighter in as little as 1 hour!
• Tried and trusted brand with consistently great results.
• Perfect for busy people who want instant results at short notice.
• Our Dental Hygienists can carry out this procedure at the same time as your professional clean.

At Dr. Roze BIODENTAL CLINIC we start every whitening treatment with a consultation. Our experienced teeth whitening specialist will discuss any queries you might have about the whitening process before your treatment.

During this consultation we assess your initial shade and note your lifestyle habits so your treatment can be tailored to your needs and desired results.

Then you sit back and get comfortable while we brighten your smile.
We use a protective sheet to cover lips and gums for maximum protection. We then apply the whitening gel to the teeth ensuring all bottom and top teeth are evenly covered. The LED light is used to activate the gel and break down stain particles to whiten the enamel. Light time depends on your desired whitening shade.

At Dr. Roze BIODENTAL CLINIC we start every whitening treatment with a consultation. Our experienced teeth whitening specialist will discuss any queries you might have about the whitening process before your treatment.

During this consultation we assess your initial shade and note your lifestyle habits so your treatment can be tailored to your needs and desired results.

Then you sit back and get comfortable while we brighten your smile.
We use a protective sheet to cover lips and gums for maximum protection. We then apply the whitening gel to the teeth ensuring all bottom and top teeth are evenly covered. The LED light is used to activate the gel and break down stain particles to whiten the enamel. Light time depends on your desired whitening shade.

We will first conduct a thorough examination to decide which whitening treatment is best for you. We then make custom whitening trays of your teeth using a mold. You will receive these trays, bleaching gel and instructions to ensure you are safely whitening at home. We will also discuss treatment time and after-care in order to get the best results.

These 3 easy steps can put you on the path to your brand-new smile.

1ST STEP : Meet with your doctor and get a sneak peek at your new smile using the iTero Element® scanner, your Invisalign Doctor can take a fast and precise 3D digital scan of your teeth and map out a custom treatment plan just for you.

2ND STEP : Start transforming your smile right from your first fitting
this is a key step in your success. your doctor will ensure your aligners fit well, answer your questions, and let you know what to expect.

• Start wearing your aligners : When you pick up your first custom aligners, your doctor will examine your smile, ensuring our high standards are met.
• Regular doctor check-ins : your doctor will guide you to schedule face-to-face check-ups every few weeks to check your progress and pick up the next batch of aligners
• Your routine, uninterrupted : your invisalign aligners are virtually transparent and easy to take out, so you can keep brushing and eating as you normally would.

3RD STEP : keep your brand-new smile beautiful lasting results with our Vivera® retainer you transformed your smile with the world’s most advanced clear aligner system. Viva retainers are custom-made and 30% stronger than other retainers.

Whether you want to discuss clear aligners versus braces, or know the pros and cons of Invisalign® , we are here to help create a custom treatment plan based on your teeth, situation and budget. We can also give you an accurate estimate of how long it should take to re-align your teeth.

Depending on the complexity of your case, you could complete your treatment in as little as 6 months. But you’ll start seeing results in a matter of weeks.

Invisalign® is a series of custom-made clear trays that you change through the process of your teeth straightening. They are invisible and you can remove them for eating, brushing and taking part in sports activities.

We at Dr. Roze & Associates only work with registered specialist orthodontists. Our orthodontists treat existing problems, can identify problems that are developing, and take timely action to resolve problems before they fully develops. Orthodontists treat patients of all ages.

CEREC® is a dental restoration system that allows us to produce ceramic restorations such as crowns, veneers, onlays and inlays using a variety of computer assisted technologies, including 3D photography and CAD/CAM (Computer Aided Design and Computer Aided Manufacturing) technologies.

• Chairside – a technology that can be done while you are in the chair
• Economical – restorations made right in the office
• Restorations – giving teeth natural beauty, function and strength
• Aesthetic – metal-free and natural tooth-coloured restorations
• Ceramic – high-quality ceramics close in composition to natural tooth structure

By eliminating the need for impressions, several injections, lab work, and return visits the entire CEREC® 3D procedure takes approximately 1 hour to perform. Restorations are natural-looking and extremely precise.

1. First of all, your specialist will work with you to determine the appropriate treatment. We will then prepare the tooth for the restoration by removing decay and damaged material.
2. We will then take an optical impression of the prepared tooth. This procedure can be done very efficiently using the oral camera.
3. The images can then be made into 3D virtual models using the CEREC® software on the computer screen.
4. The 3D image can be converted into a real-life, natural-looking, tooth-coloured ceramic restoration in the CEREC® milling station.
5. We will then fit the restoration into your mouth properly, securely and with perfect bite using a special bonding dental cement.

• Beautiful restorations that look and feel natural.

CEREC® ® is a highly reliable, state-of-the-art technology used to create tooth restorations such as crowns, veneers, onlays inlays, and bridges in a single visit. With CEREC® , we can design your restoration that looks beautiful and feels very natural.

• Your restoration in just one appointment.

With CEREC®, we are able to produce your restoration right in the office in less than 1 hour. There is no need to make any impressions or wear temporary products while your permanent restoration is created in an outside lab.

• The process is digital.

The CEREC® process relies on digital imaging to accurately determine the specifications of the restoration rather than dental impressions, eliminating the need to endure that sometimes unpleasant process.

• Restorations are made from the highest quality porcelain.

The strength that comes from milling restorations from a single block of ceramic porcelain makes it durable and resistant to cracks and flaws when chewing and biting. The ceramic material is anti-abrasive, plaque-resistant and responds like your natural teeth to changes in temperature. Also, this high-quality material is personally selected to match the natural colour of your other teeth.

• Recovery time is faster.

Restoring a tooth immediately after an invasive treatment means there is less irritation, the tooth structure is maintained and there is less chance of infection.

The CEREC® Acquisition Unit – is a medical grade computer and specifically-designed oral camera. We first take a digital picture of your tooth, which is used instead of traditional impressions. The computer and CEREC® 3D software then converts the digital image to a 3D virtual model on the screen right in front of you. We can then work together to design the perfect restoration such as a crown, inlay/onlay or veneer.

The CEREC® Milling Unit – We will select a ceramic block that matches perfectly to the shade of your teeth and insert it into the milling unit. The data from the acquisition unit will then be sent and the block is carved to the exact shape and dimensions that we have selected from your restoration. We will then polish the finished product and fit it into place.

CEREC® is a registered trademark of Sirona Dental Systems.

Meet our specialists at Doctor Roze BIOHEALTH & BIODENTAL CLINICS :